Radio and internet communication · DMR and TETRA
MicroGIS SmartRoute — an industrial radio network as a service
A software platform that brings repeaters, terminals and dispatch positions from different vendors into one managed digital radio network over IP. The nodes route voice, data and messages; the coordinator runs the whole network from a browser.
Features
Equipment from any vendor
Motorola, Hytera, Kirisun, RadioActivity, Abell, MMDVM repeaters, hotspots and gateways work in one network instead of separate islands. Your existing repeaters stay where they are — SmartRoute joins them over IP.
Scale without rebuilding
From a single site to a regional or nationwide network: repeaters connect to nodes, nodes connect to each other. The vendors' own systems cap the number of repeaters in one system; here there is no such ceiling.
One communication space, with roaming
One subscriber, one network across every site of the organisation, whatever the equipment vendor. A subscriber moves between repeaters and nodes without reprogramming the radio and hears their own group at any site.
Flexible routing
Static and dynamic groups, clusters, routes and schedules: the traffic goes only where it is needed. In the vendors' own systems a group is heard at every site at once — here you decide where it is heard.
Dispatching from the browser
Listening to talk groups, voice calls and text messages, dropping a call, group priorities — in an ordinary browser, with no separate licensed software and no extra gateways.
Oversight and location
Where the subscribers and the equipment are, what is on the air, which alarms are open — on the map and in the logs. Location, telemetry and events arrive in real time, and coverage areas are computed with the terrain taken into account.
Security and accountability
Only registered equipment is admitted, with roles, departments and a log of every action. Every node has its own Ed25519 key and short-lived tokens; the channels are HTTPS and WSS, and listening to a group needs a token.
Interworking with other systems
Voice gateways to VoIP and analogue networks, c-Bridge CC-CC, OpenBridge, IPSC for third-party dispatch software, and interworking with TETRA, D-STAR, System Fusion and NXDN.
Delivered as a service
The network nodes and the coordinator live in the MicroGIS infrastructure: updates, backups, monitoring and support are on our side. No capital spending on servers or licences, and you pay as the network grows.
How it works
Network topology: a star for control, a mesh for voice
The coordinator in the centre hands the configuration down to the nodes and collects calls, events and state from them. Voice and data travel directly between nodes, so a node keeps working even when the coordinator is unreachable.
- A subscriber presses the PTT — the repeater sends the voice to its node over IP, in its own vendor's protocol.
- The node admits only registered equipment and subscribers from the network registry.
- The core works out the recipients — static and dynamic groups, clusters, routes — and passes the call straight to the neighbouring nodes over the mesh.
- The voice reaches the repeaters of the other sites, the gateways and the third-party dispatch — and only where the group is needed.
- The call shows up in the coordinator at once: on the air map and in the dispatcher's web console, where they can join in.
- When it ends, the call goes into the log and the statistics, next to the equipment events and the user actions.
- And back: an administrator changes a group or a route, and in about five seconds the new rules are live on every node, with no break in service.
What the coordinator gives the user
Every role works in one web interface — in three languages, in a light and a dark theme. What happens on the air arrives in real time, with no page to reload.
SmartRoute vs. the vendors' classic approach
The classic systems link repeaters of a single make inside one system. Below are the seven differences that lead customers to choose SmartRoute instead of growing such a system.
| IP Site Connect / Multi-Site Connect | MicroGIS SmartRoute | |
|---|---|---|
| Scale | A limited number of repeaters per system | Nodes join into one network: from a single site to national scale |
| Manufacturers | One manufacturer's equipment only | Motorola, Hytera, Kirisun, RadioActivity, Abell, MMDVM — in one network |
| Architecture | The master repeater is a single point of failure | A server core and a mesh between nodes; each node runs autonomously |
| Management | Each repeater is set up with a programming tool | Centrally in the browser; changes on air within seconds |
| Traffic | A talkgroup is heard on every site of the system | Talkgroups, clusters, routes, schedules — only where needed |
| Dispatch | Separate licensed software and gateways | A built-in web console and talkgroup monitoring |
| Monitoring | Minimal, with no history | A live map, a call log, alarms, statistics and node health |
Who it is for
How to get connected
- 1
A request and a survey: the sites, the equipment you already have, the number of subscribers, the requirements for groups and dispatching.
- 2
A department and the accounts: an isolated space for your organisation, administrators, roles and access rights.
- 3
Connecting the repeaters: repeaters and hotspots connect to a node over IP — through the internet or a VPN.
- 4
Groups and routes: talk groups, clusters, routes and schedules shaped to the tasks of the organisation.
- 5
Day-to-day use: dispatchers and subscribers work in the network while MicroGIS supports and updates it.
What the system is made of
- The SmartRoute Node — a radio traffic routing server: it accepts repeaters, hotspots, terminals and gateways, and switches voice, data and messages. It runs DMR Core and Tetra Core
- The SmartRoute Coordinator — the single control centre: it keeps the network configuration, hands it down to the nodes, collects calls, events and state, and gives every role a web interface
- The node agent — the link to the coordinator over HTTPS with an Ed25519 key: it fetches the configuration and the commands and returns events, calls and state. The agent always starts the request, so the node needs no inbound connections
- The node services — the configuration registry, the call log, the telemetry bus and the console web gateway
- The working positions — dispatchers, operators, administrators and subscribers all work in a browser: monitoring, control, the call console and a personal account
- Coverage calculation — radio coverage areas computed with the terrain taken into account
What MicroGIS takes on
- The network nodes and the coordinator in our own infrastructure
- Updates, backups and security
- Node monitoring and a public status page
- Support and technical assistance
- Your own department — an isolated space in the network with administrators of your own
- Your repeaters connected over IP — with no servers or licences to buy
- You pay as you grow: the subscription follows the size of the network
Radio standards
Repeaters and systems
Interworking
Integration and transport
SmartRoute does not replace the repeaters you already have — it joins them into one network over IP. A node keeps working on its last configuration even when the coordinator is unreachable, and the link between nodes does not depend on a single server: there is no master repeater to be a single point of failure. A change made in the coordinator reaches the nodes in about five seconds — with no restart and no break in service.
Have a task in mind?
Tell us what you need to automate or protect, and we will propose a solution.