﻿<?xml version="1.0" encoding="utf-8"?>
<ManageTool>
	<ToolTips>
		<!-- GTBSI -->
		<ToolTip Command="GTBSI" ControlID="APN" Caption="APN" Text="Access Point Name"/>
		<ToolTip Command="GTBSI" ControlID="APNUsername" Caption="User name" Text="User name"/>
		<ToolTip Command="GTBSI" ControlID="APNPassword" Caption="Password" Text="Password"/>
		<!-- GTSRI -->
		<ToolTip Command="GTSRI" ControlID="ReportMode" Caption="Report Mode" Text="This defines the transmission mode between the backend server and unit."/>
		<ToolTip Command="GTSRI" ControlID="BufferEnable" Caption="Buffer Enable" Text="When enabled, the report messages will be stored to unit memory if no GSM/GPRS network covering."/>
		<ToolTip Command="GTSRI" ControlID="MainServerIP" Caption="Main Server IP" Text="The IP address or the domain name of the main backend server."/>
		<ToolTip Command="GTSRI" ControlID="MainServerPort" Caption="Main Server Port" Text="The port of the main backend server."/>
		<ToolTip Command="GTSRI" ControlID="BackupServerIP" Caption="Backup Server IP" Text="The IP address of the backup backend server."/>
		<ToolTip Command="GTSRI" ControlID="BackupServerPort" Caption="Backup Server Port" Text="The port of the backup backend server."/>
		<ToolTip Command="GTSRI" ControlID="SMSGateway" Caption="SMS Gateway" Text="The number of the SMS gateway used for unit sending SMS to or receiving SMS from. National code starting with‘+’is supported."/>
		<ToolTip Command="GTSRI" ControlID="HeartbeatInterval" Caption="Heartbeat Interval" Text="The interval of sending heartbeat package message which makes GPRS connection alive."/>
		<ToolTip Command="GTSRI" ControlID="SACKEnable" Caption="SACK Enable" Text="This defines whether the backend server should respond to unit with SACK message when receiving messages from the terminal."/>
		<!-- GTQSS -->
		<ToolTip Command="GTQSS" ControlID="APN" Caption="APN" Text="Access Point Name"/>
		<ToolTip Command="GTQSS" ControlID="APNUserName" Caption="APN User Name" Text="Username"/>
		<ToolTip Command="GTQSS" ControlID="APNPassword" Caption="APN Password" Text="Password"/>
		<ToolTip Command="GTQSS" ControlID="ReportMode" Caption="Report Mode" Text="This defines the transmission mode between the backend server and unit."/>
		<ToolTip Command="GTQSS" ControlID="BufferEnable" Caption="Buffer Enable" Text="When enabled, the report messages will be stored to unit memory if no GSM/GPRS network covering."/>
		<ToolTip Command="GTQSS" ControlID="MainServerIP" Caption="Main Server IP" Text="The IP address or the domain name of the main backend server."/>
		<ToolTip Command="GTQSS" ControlID="MainServerPort" Caption="Main Server Port" Text="The port of the main backend server."/>
		<ToolTip Command="GTQSS" ControlID="BackupServerIP" Caption="Backup Server IP" Text="The IP address of the backup backend server."/>
		<ToolTip Command="GTQSS" ControlID="BackupServerPort" Caption="Backup Server Port" Text="The port of the backup backend server."/>
		<ToolTip Command="GTQSS" ControlID="SMSGateway" Caption="SMS Gateway" Text="The number of the SMS gateway used for unit sending SMS to or receiving SMS from. National code starting with ‘+’is supported."/>
		<ToolTip Command="GTQSS" ControlID="HeartbeatInterval" Caption="Heartbeat Interval" Text="The interval of sending heartbeat package message which makes GPRS connection alive."/>
		<ToolTip Command="GTQSS" ControlID="SACKEnable" Caption="SACK Enable" Text="This defines whether the backend server should respond to unit with SACK message when receiving messages from the terminal."/>
		<!-- GTCFG -->
		<ToolTip Command="GTCFG" ControlID="NewPassword" Caption="New Password" Text="Set to replace the old password."/>
		<ToolTip Command="GTCFG" ControlID="DeviceName" Caption="Device Name" Text="An ASCII string to represent the name of unit."/>
		<ToolTip Command="GTCFG" ControlID="ODOEnable" Caption="ODO Enable" Text="Enable/disable to calculate the total mileage."/>
		<ToolTip Command="GTCFG" ControlID="ODOInitialMileage" Caption="ODO Initial Mileage" Text="The initial value for calculating the total mileage."/>
		<ToolTip Command="GTCFG" ControlID="GPSOnNeed" Caption="GPS On Need" Text="Whether to close GPS chip after retrieving GPS position information."/>
		<ToolTip Command="GTCFG" ControlID="GPSFixDelay" Caption="GPS Fix Delay" Text="The time to wait after GPS fixing succeed."/>
		<ToolTip Command="GTCFG" ControlID="ReportItemsMask" Caption="Report Items Mask" Text="Bitwise report mask to configure the composition of all the uplink message."/>
    <ToolTip Command="GTCFG" ControlID="GSMReport" Caption="GSM Report" Text="Information of the service cell and the neighbour cells when GPS fix fail."/>
    <ToolTip Command="GTCFG" ControlID="EventMask" Caption="Event Mask" Text="Bitwise mask to configure which event message should be sent to the backend server."/>
    <ToolTip Command="GTCFG" ControlID="EPBMode" Caption="EPB Mode" Text="The mode of External Power Control Unit With Built-in Motion Sensor."/>
		<ToolTip Command="GTCFG" ControlID="LEDOn" Caption="LED On" Text="Configure the working mode of power LED and GPS LED."/>
		<ToolTip Command="GTCFG" ControlID="InfoReportEnable" Caption="Info Report Enable" Text="Enable/disable unit information report function."/>
		<ToolTip Command="GTCFG" ControlID="InfoReportInterval" Caption="Info Report Interval" Text="Reporting interval for sending unit information."/>
		<ToolTip Command="GTCFG" ControlID="LocationByCall" Caption="Location By Call" Text="Configure how to handle an incoming call."/>
		<ToolTip Command="GTCFG" ControlID="ExpiryEnable" Caption="Expiry Enable" Text="Enable/disable the expiry function to stop all the GPS fixing and any reports."/>
		<ToolTip Command="GTCFG" ControlID="ExpiryTime" Caption="Expiry Time" Text="The time when to stop all the GPS fixing and any reports."/>
    <ToolTip Command="GTCFG" ControlID="CheckAllReportMask" Caption="Check All" Text="Pick out all pickings."/>
    <ToolTip Command="GTCFG" ControlID="CheckAllEventMask" Caption="Check All" Text="Pick out all pickings."/>
    <ToolTip Command="GTCFG" ControlID="AgpsMode" Caption="Agps Mode" Text="A numeric to indicate whether to enable AGPS"/>
    <ToolTip Command="GTCFG" ControlID="SleepEnable" Caption="Sleep enable" Text="Enable or disable the sleep mode when charging"/>
    
    <!-- GTPIN -->
    <ToolTip Command="GTPIN" ControlID="EnableAutoUnlockPIN" Caption="Enable Auto-Unlock PIN" Text="Enable/Disable the auto-unlock PIN function."/>
    <ToolTip Command="GTPIN" ControlID="PIN" Caption="PIN" Text="Code used to unlock the SIM PIN"/>
    <ToolTip Command="GTPIN" ControlID="PINChecking" Caption="PIN Checking" Text="A numeric to indicate whether to lock the device with SIM-PIN."/>
    <!-- GTDOG -->
    <ToolTip Command="GTDOG" ControlID="Mode" Caption="Mode" Text="Working mode"/>
    <ToolTip Command="GTDOG" ControlID="IgnitionFrequency" Caption="Ignition Frequency" Text="If the time interval between two adjacent ignition on events is greater than this value, \n unit will automatically reboot when ignition on."/>
    <ToolTip Command="GTDOG" ControlID="Interval" Caption="Interval" Text="The interval to reboot the device in day."/>
    <ToolTip Command="GTDOG" ControlID="Time" Caption="Time" Text="The time clock to perform the reboot operation after 'Interval' is met."/>
    <ToolTip Command="GTDOG" ControlID="ReportBeforeReboot" Caption="Report Before Reboot" Text="Whether to report the +RESP:GTDOG message before reboot."/>
    <ToolTip Command="GTDOG" ControlID="InputID" Caption="Input ID" Text="ID of the digital input port which is used to trigger the manually reboot in despite of working mode."/>
    <ToolTip Command="GTDOG" ControlID="UnitMode" Caption="Unit" Text="The unit mode of the Interval."/>
    <ToolTip Command="GTDOG" ControlID="GsmInterval" Caption="Gsm interval" Text="The interval to reboot the device when in no GSM signal situation."/>
    <ToolTip Command="GTDOG" ControlID="PdpInterval" Caption="Pdp interval" Text="The interval to reboot the device when GPRS unable to register successfully."/>    
    <!-- GTTMA -->
    <ToolTip Command="GTTMA" ControlID="Sign" Caption="Sign" Text="Indicate the positive or negative of UTC offset from local time."/>
    <ToolTip Command="GTTMA" ControlID="HourOffset" Caption="Hour Offset" Text="UTC offset in hours."/>
    <ToolTip Command="GTTMA" ControlID="MinuteOffset" Caption="Minute Offset" Text="UTC offset in minutes."/>
    <ToolTip Command="GTTMA" ControlID="DaylightSaving" Caption="Day light Saving" Text="Enable/disable daylight saving time."/>
    <ToolTip Command="GTTMA" ControlID="UTCTime" Caption="UTC Time" Text="UTC time used to adjust local time."/>
    <!-- GTNMD -->
    <ToolTip Command="GTNMD" ControlID="Mode" Caption="Mode" Text="A hex numeric to determine how the function works."/>
    <ToolTip Command="GTNMD" ControlID="NonMovementDuration" Caption="Non Movement Duration" Text="A time parameter to determine whether the device enters non-movement status."/>
    <ToolTip Command="GTNMD" ControlID="MovementDuration" Caption="Movement Duration" Text="A time parameter to determine whether the device enters movement status."/>
    <ToolTip Command="GTNMD" ControlID="MovementThreshold" Caption="Movement Threshold" Text="The threshold for the motion sensor to determine whether the device is in movement."/>
    <ToolTip Command="GTNMD" ControlID="RestFixInterval" Caption="Rest Fix Interval" Text="the fix interval for the report of FRI when the device is in rest state if Bit3 of (mode) is 1."/>
    <ToolTip Command="GTNMD" ControlID="RestSendInterval" Caption="Rest Send Interval" Text="the send interval for the report of FRI when the device is in rest state if Bit3 of (mode) is 1."/>
    <ToolTip Command="GTNMD" ControlID="PmRestThreshold" Caption="Pm Rest Threshold" Text=""/>
    <ToolTip Command="GTNMD" ControlID="PmMotionThreshold" Caption="Pm Motion Threshold" Text=""/>
    <ToolTip Command="GTNMD" ControlID="UrcReport" Caption="Urc Report" Text="Enable or disable output sensor state through urc."/>
    <!--GTFKS-->
    <ToolTip Command="GTFKS" ControlID="PowerKeyEnable" Caption="Power Key Mode" Text="A numeric to indicate the working mode of the power key."/>
    <ToolTip Command="GTFKS" ControlID="FullPowerUp" Caption="Full Power Up" Text="A numeric to indicate whether the terminal powers on completely after the terminal was power on because of charger inserted."/>
    <ToolTip Command="GTFKS" ControlID="FunctionKeyMode" Caption="Function Key Mode" Text="The working mode for the function key operation."/>
    <!-- GTFRI -->
    <ToolTip Command="GTFRI" ControlID="Mode" Caption="Mode" Text="The working mode of fixed report."/>
    <ToolTip Command="GTFRI" ControlID="CheckInterval1" Caption="Check Interval 1" Text="The interval time to fix GPS when vehicle is ignition off."/>
    <ToolTip Command="GTFRI" ControlID="SendInterval1" Caption="Send Interval 1" Text="Timed cycle to send report to the backend server."/>
    <ToolTip Command="GTFRI" ControlID="CheckInterval2" Caption="Check Interval 2" Text="The interval time to fix GPS when the device attached vehicle is ignition on."/>
    <ToolTip Command="GTFRI" ControlID="SendInterval2" Caption="Send Interval 2" Text="The period to send the position information when the device attached vehicle is ignition on."/>
    <ToolTip Command="GTFRI" ControlID="StartTime" Caption="Start Time" Text="The start time of the schedule fixed report."/>
    <ToolTip Command="GTFRI" ControlID="EndTime" Caption="End Time" Text="The end time of the schedule fixed report."/>
    <ToolTip Command="GTFRI" ControlID="Distance" Caption="Distance" Text="The specified distance to send the position information when (Mode) is 2."/>
    <ToolTip Command="GTFRI" ControlID="Mileage" Caption="Mileage" Text="The specified path length to send the position information when (Mode) is 3."/>
    <ToolTip Command="GTFRI" ControlID="MovementDetectMode" Caption="Movement Detect Mode" Text="Enable or disable the movement detect function."/>
    <ToolTip Command="GTFRI" ControlID="MovementSpeed" Caption="Movement Speed" Text="The speed threshold of movement detect."/>
    <ToolTip Command="GTFRI" ControlID="MovementDistance" Caption="Movement Distance" Text="The distance threshold of movement detect."/>
    <ToolTip Command="GTFRI" ControlID="MovementSendNumber" Caption="Movement Send Number" Text="The number of reports which the terminal will send out before it moves again."/>
    <ToolTip Command="GTFRI" ControlID="ReportMask" Caption="Report Mask" Text="Bitwise mask to configure the composition of the fixed report message."/>
    <ToolTip Command="GTFRI" ControlID="DiscardNoFix" Caption="Discard No Fix" Text="Disable/enable reporting when there is no GPS fixing."/>
    <ToolTip Command="GTFRI" ControlID="CheckAllReportMask" Caption="Report Mask" Text="Pick out all of Report Mask"/>
    <ToolTip Command="GTFRI" ControlID="Corner" Caption="Corner" Text=""/>
    <!-- GTGEO -->
    <ToolTip Command="GTGEO" ControlID="GEOID" Caption="GEO ID" Text="ID of the Geo-Fence."/>
    <ToolTip Command="GTGEO" ControlID="Mode" Caption="Mode" Text="The working mode of the Geo-Fence alarm."/>
    <ToolTip Command="GTGEO" ControlID="Latitude" Caption="Latitude" Text="The latitude of a point which is defined as the center of the Geo-Fence circular region."/>
    <ToolTip Command="GTGEO" ControlID="Longitude" Caption="Longitude" Text="The longitude of a point which is defined as the center of the Geo-Fence circular region."/>
    <ToolTip Command="GTGEO" ControlID="Radius" Caption="Radius" Text="The radius of the Geo-Fence circular region."/>
    <ToolTip Command="GTGEO" ControlID="CheckInterval" Caption="Check Interval" Text="The interval of GPS checking for the Geo-Fence alarm."/>
    <ToolTip Command="GTGEO" ControlID="StateMode" Caption="State Mode" Text="The State Mode: 0: It should report when get the state first time.1: It doesn’t report until the state changes."/>
    <!-- GTSPD -->
    <ToolTip Command="GTSPD" ControlID="Mode" Caption="Mode" Text="The working mode of the speed alarm."/>
    <ToolTip Command="GTSPD" ControlID="MinSpeed" Caption="Min Speed" Text="Minimum speed limit."/>
    <ToolTip Command="GTSPD" ControlID="MaxSpeed" Caption="Max Speed" Text="Maximum speed limit."/>
    <ToolTip Command="GTSPD" ControlID="Duration" Caption="Duration" Text="A period of time that the speed meets and maintains in the alarm condition."/>
    <ToolTip Command="GTSPD" ControlID="SendInterval" Caption="Send Interval" Text="The interval of sending speed alarm message if unit maintains in the alarm condition."/>    
		<!-- GTOUT -->
		<ToolTip Command="GTOUT" ControlID="Enable_Output1" Caption="Enable Output1" Text="Set the final status of the output port 1 when the waveform remains high or low."/>
		<ToolTip Command="GTOUT" ControlID="Duration_Output1" Caption="Duration Output1" Text="Set half-cycle time of square-wave."/>
		<ToolTip Command="GTOUT" ControlID="ToggleTimes_Output1" Caption="Toggle Times Output1" Text="The number of square-wave generated from output port1."/>		
		<!-- GTDIS -->
		<ToolTip Command="GTDIS" ControlID="EnableThisInput" Caption="Enable Input 1" Text="Enable/disable the interrupt input1."/>
		<ToolTip Command="GTDIS" ControlID="DebounceTime_1" Caption="Debounce Time 1" Text="The time for debouncing."/>		
		<!-- GTRTO -->
		<ToolTip Command="GTRTO" ControlID="SubCommand" Caption="Sub Command" Text="It is used to retrieve information from unit or control the terminal to execute certain actions."/>
		
		<!-- GTDAT -->
		<ToolTip Command="GTDAT" ControlID="CommandType" Caption="Command Type" Text="Command type to indicate the direction to transferring data."/>
		<ToolTip Command="GTDAT" ControlID="Data" Caption="Data" Text="Data to be transferred between the backend server and the equipment connected to the serial port of unit."/>
    <ToolTip Command="GTDAT" ControlID="NeedACK" Caption="Need ACK" Text="A numeric to indicate whether the device should reply +ACK message to the backend server.."/>
    <!--GTWLT-->
    <ToolTip Command="GTWLT" ControlID="CallFilter" Caption="Call Filter" Text="A numeric to indicate whether to filter the incoming call."/>
    <ToolTip Command="GTWLT" ControlID="MobileStart" Caption="Mobile Start" Text="A numeric to indicate the first index of the white call number to input."/>
    <ToolTip Command="GTWLT" ControlID="MobileEnd" Caption="Mobile End" Text="A numeric to indicate the last index of the white call number to input."/>
    
    <!--GTGLM-->
    <ToolTip Command="GTGLM" ControlID="GoogleMode" Caption="Google Mode" Text="A numeric to indicate whether to send a SMS with google link."/>
    <ToolTip Command="GTGLM" ControlID="MobileStart" Caption="Mobile Start" Text="A numeric to indicate the first index of the direct number to input."/>
    <ToolTip Command="GTGLM" ControlID="MobileEnd" Caption="Mobile End" Text="A numeric to indicate the last index of the direct number to input."/>
    <!--GTSFM-->
    <ToolTip Command="GTSFM" ControlID="OnOffEnable" Caption="OnOff Enable" Text="Enable or disable “SFM” based functionality."/>
    <ToolTip Command="GTSFM" ControlID="OffTime" Caption="Off Time" Text="When “SFM” is enabled and GPS fix can not be aquired for “OffTime” minutes, \n GSM communication module will be disabled."/>
    <ToolTip Command="GTSFM" ControlID="OnTime" Caption="OnTime" Text="If GPS signal is back and available for “OnTime”minutes \n the GSM communication module can be activated again  "/>
    <ToolTip Command="GTSFM" ControlID="SFAlt" Caption="SFAlt" Text="If GPS signal is available for “onTime” minutes and unit’s altitude is LOWER than “SFAlt”, \n GSM communication module can be activated."/>
    <ToolTip Command="GTSFM" ControlID="SFSpeed" Caption="SF Speed" Text="If GPS signal is available for “onTime” minutes and unit’s speed is LOWER than“SFSpeed”, \n then GSM communication module can be activated"/>
    <!--GTNTS-->
    <ToolTip Command="GTNTS" ControlID="Enable" Caption="Enable" Text="Enable or disable “NTS” based functionality"/>
    <ToolTip Command="GTNTS" ControlID="RssiThrehold" Caption="Rssi threhold " Text="The threshold of the CSQ value."/>
    <ToolTip Command="GTNTS" ControlID="Interval" Caption="Interval" Text="The interval time to change to another opetor"/>
    <ToolTip Command="GTNTS" ControlID="Oper1" Caption="Oper1" Text="The first network it will select when under threshold over interval time."/>
    <ToolTip Command="GTNTS" ControlID="Oper2" Caption="Oper2" Text="The second network it will select when under threshold over interval time."/>
    <ToolTip Command="GTNTS" ControlID="Oper3" Caption="Oper3" Text="The third network it will select when under threshold over interval time."/>
    <ToolTip Command="GTNTS" ControlID="GSMinterval" Caption="GSM interval" Text="The time in minute before changing the operator without GSM network."/>
    <!--GTCMD-->
    <ToolTip Command="GTCMD" ControlID="Mode" Caption="Mode" Text="The working mode of the Store Command String"/>
    <ToolTip Command="GTCMD" ControlID="StoreCmdId" Caption="Store cmd id" Text="A numeric to identify the store command"/>
    <ToolTip Command="GTCMD" ControlID="CommandString" Caption="Command string" Text="AT command String"/>

    <!--GTUDF-->
    <ToolTip Command="GTUDF" ControlID="Mode" Caption="Mode" Text="The working mode of the User Define Function"/>
    <ToolTip Command="GTUDF" ControlID="GroupId" Caption="Group id" Text="A numeric to identify the group"/>
    <ToolTip Command="GTUDF" ControlID="DebounceTime" Caption="Debounce time" Text="The time for debouncing input event"/>
    <ToolTip Command="GTUDF" ControlID="StocmdAck" Caption="Stocmd ack" Text=""/>
    <ToolTip Command="GTUDF" ControlID="InputIdMask" Caption="Input id mask" Text="The mask used to select the input events which should meet the state"/>
    <ToolTip Command="GTUDF" ControlID="StocmdIdMask" Caption="Stocmd id mask" Text="The mask used to select the store commands which will be executed when the state of group changes"/>
    
    <!-- GTOWH -->
    <ToolTip Command="GTOWH" ControlID="Mode" Caption="Mode" Text="Working mode"/>
    <ToolTip Command="GTOWH" ControlID="DayOfWork" Caption="Day Of Work" Text="Bitwise mask to specify the working days in a week."/>
    <ToolTip Command="GTOWH" ControlID="WorkingHoursStart1" Caption="Working Hours Start1" Text="The first period of the start working hours in a day."/>
    <ToolTip Command="GTOWH" ControlID="WorkingHoursEnd1" Caption="Working Hours End1" Text="The first period of the end working hours in a day."/>
    <ToolTip Command="GTOWH" ControlID="WorkingHoursStart2" Caption="Working Hours Start2" Text="The second period of the start working hours in a day."/>
    <ToolTip Command="GTOWH" ControlID="WorkingHoursEnd2" Caption="Working Hours End2" Text="The second period of the end working hours in a day."/>
    <ToolTip Command="GTOWH" ControlID="DigitalInputID" Caption="Digital Input ID" Text="ID of the digital input port."/>
    <ToolTip Command="GTOWH" ControlID="OutputID" Caption="Output ID" Text="ID of the output port."/>
    <ToolTip Command="GTOWH" ControlID="OutputStatus" Caption="Output Status" Text="ID of the output port status."/>
    <ToolTip Command="GTOWH" ControlID="Duration" Caption="Duration" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTOWH" ControlID="ToggleTimes" Caption="Toggle Times" Text="The number of square-wave generated"/>
    <!-- GTOWH -->
    <ToolTip Command="GTRDF" ControlID="Mode" Caption="Mode" Text="Working mode"/>
    <ToolTip Command="GTRDF" ControlID="Highspeedmode" Caption="High speed mode" Text="discard the fix data when the speed exceeds High speed."/>
    <ToolTip Command="GTRDF" ControlID="Highspeed" Caption="Highspeed" Text="discard the fix data when the speed exceeds High speed."/>
    <ToolTip Command="GTRDF" ControlID="Sensordetection" Caption="Sensor detection" Text="A numeric to indicate whether to fix the position in one point when the device is in non-movement state detected by accelerometer sensor."/>
    <ToolTip Command="GTRDF" ControlID="Distancethresholdmode" Caption="Distance threshold mode" Text="A numeric to indicate whether to fix the position in one point if the movement distance is less than the specified value defined by the parameter Distance threshold."/>
    <ToolTip Command="GTRDF" ControlID="Distancethreshold" Caption="Distance threshold" Text="The distance threshold for check whether the device is really moving."/>
    <ToolTip Command="GTRDF" ControlID="Ubloxspeedthresholdmode" Caption="Ublox speed threshold mode" Text=" A numeric to indicate whether to set speed threshold (0.5 m/s) to judge whether the device is stationary."/>
    <ToolTip Command="GTRDF" ControlID="Restspeedthresholdmode" Caption="Rest speed threshold mode" Text="A numeric to indicate whether to force the speed to 0 if the GPS speed is less than the threshold speed defined by Rest speed threshold."/>
    <ToolTip Command="GTRDF" ControlID="Restspeedthreshold" Caption="Rest speed threshold" Text="The speed threshold to be thought as 0 if the real speed is less than it."/>
    
  </ToolTips>
</ManageTool>